Recording method: 3-color exposure with OLED
Film: FUJIFILM Instant Film “instax SQUARE” (Purchased separately)
Photo capacity: 10 prints/pack
Image size: 62 mm×62 mm/2.4 in.×2.4 in.
Supported image size: 800 x 600 dots
Printing resolution: 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Printing levels: 256 levels per color (RGB)
Interface Standard compliance: Standard compliance: IEEE802.11b/g/n
Operation frequency: 2412 MHz to
2462 MHz (11 ch)
Supported image format: JPEG, PNG
Printing time: Image recording - photo output (fed out):
Approx. 13 sec.
Approximate printing capacity: Approx. 160 prints  (Based on our test conditions)
* Varies depending on the conditions of use.
Power supply: NP-50 (1 piece)
Charging time: Approx. 3 hours (Varies depending on battery remaining level)
Power consumption: 3W
Operating temperature: +5°C to +40°C/+41°F to +104°F (no condensation)
Dimensions: 116 mm × 130.5 mm × 44.4 mm/4.6 in. ×
5.1 in. × 1.7 in. (excluding projections)
Weight: 312 g/11 oz. (without battery and film pack)
Supplied accessory: USB cable (BOB711, Length: 1 m/3.3 ft.),ferrite core